During the long-term use of the wet curtain fan, there will be a lot of dust, impurities and other dirt. In order to prolong the service life of the wet curtain fan, it is necessary to deal with the attached dust in time. Because the dust will have a corrosive effect on the wet curtain fan for a long time, it is very critical to deal with it in time. The following describes how to deal with the dust of the wet curtain fan:
1. First, disconnect the main power supply of the wet curtain fan, and then disassemble the wet curtain fan.
2. Unscrew the screw on the filter screen, remove the filter screen, soak it with clean water, and rinse it.
3. Select the blade form that is difficult to adhere to dust, such as the use of backward blades
4. Cover the wet curtain fan with a plastic bag, connect the tap water to the spray pipe and the cleaning port, and reversely flush the bottom basin of the wet curtain fan with clean water
5. After the main part and parts of the wet curtain fan are cleaned, air dry, and then put the parts such as the filter back into the wet curtain fan.
6. Clean with water regularly and intermittently. Using a mechanical removal device, the attachments can be partially removed. Through warm air and cold air, the temperature difference is formed. A method of spraying powder particles.
7. After everything is installed, reconnect the main power supply of the wet curtain fan, and you can perform other operations after 5 minutes.
Therefore, when we are cleaning, we need to pay attention to these problems, in order to do a good job in the treatment of the dust of the wet curtain fan and ensure the normal operation of the equipment.